14 Responses

1. I don’t really see the use of such a device… I see the point in using hydrogen as fuel, but making it on the bike would be pointless as the energy needed could be canalized directly into an electric motor instead without the energy loss created by making hydrogen and oxygen. Hydrogen is only a good replacement to batteries as you may store more energy in less space, but again making it on the bike would be pointless, at home very wise ;)

2. Okay, nice work, to mention that a four cylinder engine (1500 cc) will run entirely on 13 pounds of “injected HHo”, without any gasoline, Meyers engine ran for ten years. Thus, a booster will only need a fraction of that pressure to give you outstanding economy.
   Air intake vacuum pressure will also draw off the pressure relieving the container, and it should have a one way check valve to allow air to pass though and carry off hho rapidly, a 10 psi relif valve. re-biuld & move forward.

3. H there, see my video on how to keep the water crystal clear, it shows a simple idea of separating the two gases, type in the search box {NO MORE- BROWN SLUDGE }cheers for the vid.

4. cheers for the pointer. will not drink it.
   lol

5. Stainless steel has Chromium (VI) compounds
   and Your HHO generator pulls Chromium off the steel.So you have Chromium (VI)in the water and you get oxidation state from the + electrodes.Thats call (Hexavalent chromium) That can kill you… wach out

6. It is a simpl example of how this technology can be applied to automotive applications. For safety purposes when I do build the cell into a stainless pressure vessela flame arrestor will be installed, the unit will be powered by solar power in the vehicle so effectively it will produce fuel as it sits outside in the sunshine.

7. crow is correct that is close to a bobm

8. Only problem for not pressuring is that you cant do anything with it unless it is held in a pressure vessel and fitted to a motor vehicle. I will make another cell but this time out of stainless steel which will hold up to 2000 psi pressure and use a flame arrestor to prevent any possibility of flames entering the tank.
   will update as i go.

9. be careful, let gas out into open water bottle. don’t presurize… pulse the voltage to 20k hertz and you’ll quadruple the hydrogen output and lower the amperage usage. this is the top secret for all hydrogen experimentors/inventors. be careful though. goood video, thanks for sharing.

10. lol.
    nic e.

11. safety first?……yea right! …..says the guy conducting an experiment without any eye/face/body protection.

    A fool wears no eye protection.

12. HHO ?

    Hydrogen and oxygen ?

    How do i seperate the two and still maitain the rapid dispertion of the gasses ?

13. You are much braver than I am. 3-5 psi is often reached in some of my PVC drain pipe cells but only by accident. Can tell you that 500ml sealed up tight in a plastic bottle at a little less than 10psi when ignited makes a crater in tilled earth about .5 meter deep and about 1.5 meters in diameter. And gets the neighbors calling the cops on you.

14. Stop trying to store HHO!!! Run it through a bubbler and let it disipate, there is no reason for you to store HHO unless you want to blow yourself up!