The world needs a new source of energy, an unspillable source.

Water_Electrolysis_Facts 4 of 4.wmv


An electrical power source is connected to two electrodes, or two plates (typically made from some inert metal such as platinum or stainless steel) which are placed in the water. In a properly designed cell, hydrogen will appear at the cathode (the negatively charged electrode, where electrons are pumped into the water), and oxygen will appear at the anode (the positively charged electrode). Assuming ideal faradaic efficiency the generated amount (moles) of hydrogen is twice that of oxygen, and both are proportional to the total electrical charge that was sent through the solution. However, in many cells competing side reactions dominate, resulting in different products and less than ideal faradaic efficiency. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy the electrolysis of pure water occurs very slowly if at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity about one millionth that of seawater. Many electrolytic cells may also lack the requisite electrocatalysts. The efficacy of electrolysis is increased through the addition of an electrolyte (such as a salt, an acid or a base) and the use of electrocatalysts. Currently the electrolytic process is rarely used in industrial applications since hydrogen can be produced more affordably from fossil fuels.