This 4 inch diameter thruster has two emitters, C/A (one cathode and one anode).The pulse generator is built inside the cathode emitter. I use many different designed pulse generators, five different types to date. The one installed in this unit is (two air core coils) the smallest, lightest one( 1 1/2 inch dia. ). Because of its design a shield must be used around the coil windings to control ion emitions. The unit preforms well as you can see in this video, I have found that installing the pulse generator ahead of the emitters preforms better, but I have to use a different designed pulse generator (bifilar coil type). The Bifilar type pulse generator does not work well or not at all when installed inside or after the emitter. All pulse generators are of my own design. Both emitters are a paper/ aluminum laminate. The cathode emitter is also the shield for the pulser. All emitters are also of my own design. All thrusters I have shown to date are powered by a 200KV, Van De Graaf generator. I’m working on powering a thruster with the Wimshurst generator ( that produces only 70 KV ) that has not worked out so far. As I learn more about the pulse generator, I think it is possible in some form.There is no natural or electro magnets in any appliance I build . BOB
Video Rating: 5 / 5
