running the motor with no load at first to check amperage drain on the battery.Voltage on the battery is 12vdc take that times the amps = watts. do the same math for the capacitor side going back to the battery to charge it..This little model doesn’t have enough generator power to run the light or the motor so it will take more power from the battery..This motor will use less power to run because there are no field coils or rotor windings to draw any current. The magnets are thermally isolated from the power source.When a mechanical load is put on the motor speed is steped up by frequency control. Purpose of demo is to show power in verses power out scaled up, this motor could run a generator for your home or a electric vehicle with way less amperage draw from the battery compared to conventional electric motors. uses back EMF and resonant circuits to store energy in the capacitor to recharge the battery so no plug in is needed and will run for the life of the battery. Anyone interested in a venture with this technology please contact the youtube people and they will contact me I am.presently working on a real generator prototype
Video Rating: 4 / 5
7 Responses
I don’t understand how I give others a bad name? Are you an inventor or have a patent? And I am not asking anybody for any money and never did. You don’t know me but I know people like you. Oh and by the way I do have a patent on this device. People like you do nothing but hurt peoples reputation and you don’t even get to know them.
its nice that you are working on this and a great model, but ppl like you give real inventors/designer a bad name, making claims asking for let me guess money by “interested in a venture”, show real proof that it uses less power because it does not use field coils, will then just use a perm mag motor, or an AC motor which only has field coils, no rotor coil, so as you said less power used. its good to look for the KEY but you give others a bad name
The time has come for Free energy to be revealed ,But the powerfull Oil business won’t alow common ppl to know this,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
You are good! I believe in you! Radiant energy is the future!
I connected the amp meter in line with the battery and the positive feed to the device. I don’t have a scope but I’m sure the spikes will peak as in a resonant circuit I welcome all the help I can get. All was DC and the switching relay acts like a DC chopper circuit. You are welcome to test the motor. Video’s just don’t do justice to the set up.
I’d like to see more information on this and possibly even test the system for you. Do you have any waveform charts or scope videos? What does the waveform out of the capacitor look like? Pulses can be misleading.
I calculate (if all was DC) 2.3W in and 6.3W out. Looking at how you connected the ‘in’ ammeter didn’t look right. You started to do it right, by putting in line with the feed, but it appeared you changed that up to get the alligator clips and I think that will confuse some.
I think you have made and error in your setup, early in the video. Where is the 300V connected? Obviously, you can’t have 300V on the battery. It is a 12V battery. You are measuring a current to the battery.
Later, you connected the digital meter to attempt to measure the input current. Your machine takes its current in short spikes. Digital meters have limits on the frequency content of what they are measuring. The spikes contain high frequencies.