In this video you will see what i have been doing and an up coming project to validate the work of Stanley Meyer,in regards to slowing the burn rate of hydroxy and attempts to replicate magnetised gas for the use in a toriodal closed loop generator utilising what Meyer called “electro polarised gas” references to the EPG generator can be found near the end of the talk Stanley Meyer gave in Switzerland. see the link www.youtube.com
Thanks to Jim Miller for the transcription
Video Rating: 4 / 5
29 Responses
Great work. Very well done.
you mean engine power or watts to the alternator load?
I dont know the engine power increase but i got about 21 mpg before and about 29 mpg after with a 70 watt load on the alternator
How many volts?
What’s the end result in power addition?
a 5 amp cell is way less than running your headlights,in my case it was a simple tube to the air intake manifold which already had a fitting.Its the same as adding LPG to a diesel engine.Cost was about $30 for cell container and wiring…all the rest i scrounged up and made from recycled junk.
Isn’t it a rather large investment of energy to create enough gas to be usable? And how do you retrofit your engine to use hydrogen gas?
well electrolysis of water has been known since Faradays time and the science is well covered.Where the scams come in is ppl selling stuff for hydroxy gas at ridiculous prices!Also claims of mileage can be exxagerated to make products sound more appealing.I used a 5 amp cell in my diesel van and it worked for me.Since i made my cell i wasnt scammed,and since i dont sell anything i wont be scamming.
I did a search for it and came up with a lot of warnings that this is a scam.
yes that is what i am talking about.It has also been called Browns gas but is best described as the resulting mix of gasses that result after the process of electrolysis.Wether it exists as H2 and O2 or monatomic H and O is a matter of conjecture.
Are you talking about a mixture of H2 and O2 gases?
i agree that usage of the abbreviation is incorrect and prefer the word hydroxy,however anyone working with the gas is familiar with HHO and its use is common in the field.
Wait, what, HHO? That’s not even proper nomenclature in chemistry. HHO = H2O. H2O in gas form is steam…
i suppose if you separated the gasses you could ionise the hydrogen-dont think there is much chance that the oxygen wont turn into ozone-thats just what happens to it.i dont know what ionised hydrogen becomes.btw i wasnt the only one to ionise the flame off the torch-quite a few people did it,but i was the only one i know of that did it at welder temperatures and high current.
browns gas welders also had that function for getting the heat up on a small hydroxy flame.use a MOT on the tip
lol things we do ay…
hey bro is it possible to ionize the hho without it converting to o3 and h , what does ionized hydrogen do by itself any way , have you tried isolating some h2? i know your more into the meyers hho patents but was just remembering your hho ionized flame vid… its the only 1 on youtube bro or the internet for that matter, i was very intrested in that experiment.
thanks for the info , i have a plasma ball circuit i was using for experiments. nevr considerd it could generate ozone. i built one for my friend so he could grow weed , mold was killing his sht , it killed the mold but as i told him this thing could kill you to,,, it could catch fire also , it was way to big, huge neon tranny
i have seen one years ago it came out of a jap import torago van for cleaning the dirty air as it came into the air con…the one i was using on the hydroxy makes alot of ozone-can smell ozone after just a few seconds of runtime-i can also make one from a small $10 plasma ball-just take off the ball and put the HV output wire flush with a glass surface and some foil on the back of the glass…
yeah some clever bastard reprogramming music players…to make scopes.
cool vid, have you seen those little air purifiers they have a device for cars and they have a bad as little ionizing electrode array inside of them , they look like hho wet cells and if you hack them they put off alot off gas
bad as little oscila scope bro
it is certainly worth exploring, i agree. i think what you are doing is super !
yeah, thats right, he must’ve found results otherwise he wouldn’t have kept it up. the coil around the tube must accelerate the gases really fast and maybe the effect only happens at great speed..and because they are gases maybe the magnetic field from them is kinda sparse, and so might not move a compass at low speed
Russ thanx for going over the patents and bringing this to light-no i didnt removed the coating on the magnets-i figured it would burn off anyway-i ran the spark several times before i put a lid on it and it looked like the coating was corroding.
i will be trying cobalt drills next time and making a more robust container for makiong particles so i can run it off a welder or other higher current device to rip up the metal quicker-im concerned about it being too dilute in the gas.
@beac310 best idea would be to get rid of the timing circuit and replace it so that the ioniser wont turn off-thanx for commenting
yes i put large neo magnets on the output tube when i ran it…
Gracias, lo he respaldado, espero sigas asà con tu trabajo…
excelente la traducción gracias por compartir en español y llevar el conocimiento donde debe estar: en todos y absolutamente todos los habitantes de este planeta! Gracias que Dios te bendiga.
Excelente traducción !!!
Que bueno gracias!!